Bowie Dick Self Adhesive Test Pack
Bowie Dick Self Adhesive Test Pack are pre-assembled single use test packs designed to evaluate the performance of the air removal system of pre-vacuum equipped sterilizers manufactured according EN 285 as self adhesive. Bowie Dick Self Adhesive Test Pack Operation Conditions Several versions of these test packs are available.
How does Bowie Dick Self Adhesive Test Pack run in the cycle ?
The Bowie Dick Self Adhesive Test Pack is run in an otherwise empty chamber because this is a more spesific test than if the chamber was full with a normal load. If there were other packs in the chamber, any air present would be distributed throughout all the packs and thus fail to be detected by the indicator sheet in the Bowie Dick Self Adhesive Test Pack. The test pack should be placed on the bottom shelf of the sterilizer rack, over the drain, because this is the coldest spot in the sterilizer chamber.
Which sterilization process is Bowie Dick Self Adhesive Test Pack designed for ?
Bowie Dick Self Adhesive Test Packs are designed to be used in Steam sterilizers.
Which sterilization cycle are Bowie Dick Self Adhesive Test Packs working with ?
Bowie Dick Self Adhesive Test Packs are designed operate at steam cycle 134 C – 3,5 minutes or 121 C – 15 minutes conditions.
What is the standart of ISO for Bowie Dick Self Adhesive Test Pack ?
Bowie Dick Self Adhesive Test Packs according to ISO 11140-1, ISO 11140-3 and ISO 11140-4 standart. CE marking is not applicable for indicator products, because this product is not considered a medical device under the clause of the EC-directive.
Bowie & Dick Test
Self Adhesive
Bowie & Dick Test
Self Adhesive
Bowie & Dick Test
Self Adhesive
Bowie & Dick Test
Self Adhesive